The VarseoSmile TriniQ Resin is a cutting‑edge ceramic‑filled, biocompatible printing material formulated for use in dental laboratories with the Formlabs ecosystem. It delivers exceptional strength and aesthetics for both temporary and permanent restorations — from single units to short-span bridges and denture teeth.
You’ll appreciate its proven mechanical performance, including:
- Flexural strength of 120 MPa and flexural modulus of 3,600 MPa
- Shore hardness ≥ 90 D
- Low water sorption (< 0.6 µg/mm³) and solubility (< 12 µg/mm³)
- Density ≈ 1.29 g/cm³ and viscosity ~3,300 cP at 22 °C
This resin is engineered for accuracy: over 95 % of printed surface areas fall within 50 µm of the original CAD model (at 50 µm or 100 µm layer thickness). It’s the first 3D‑print resin indicated for permanent bridges (up to 3 units) and can also be used for temporary bridges (up to 7 units), crowns, inlays, onlays, veneers, and denture teeth.
Clinically, VarseoSmile TriniQ exhibits wear behavior comparable to lithium disilicate while being antagonist‑friendly. It bonds strongly with common adhesive cements and is repairable or relinable with standard composite materials.
| SKU | 6700057N |
|---|---|
| Brand | Formlabs |
| Mfr Sku | RS-C2-TQA2-01 |
| Part Type | Others |
| Condition | Overstocked |
| Warranty | 1 YEAR |
